Maintenance
Continuous Feed: 50-150 ppm based on blowdown.
Best fed into basin or with make-up water.
Initiating the Program
When bringing BCP 6010 on line best practice is to initiate the dosing at 50 ppm to clean up biofouling deposits lingering in the system. The water will become more turbid as deposits are removed. In a few days as the water clears, increase the dosage in increments of 10 ppm until you reach your target level.
Note: Best practice to clean up a heavily fouled system with BCP® 1015 or BCP® 2175 slug dose program to achieve a clean system before initiating continuous dosing program with BCP® 6010.
